Concretebroker

Blog

article title image

Published on 7/3/2018

Published by marketing@concretebroker.com.au

30 Top Tools for construction sites

Here’s a list of 30 tools you might need on a concrete construction site from start to finish


 

Source : wagnermeters.com

 

30 Top Tools for the Concrete Construction Site

by 

Concrete Construction Tools

 

Once wet concrete starts to pour, you need to be prepared to move quickly. No one wants to get to the job site and realize they left a tool behind.

Here’s a list of 30 tools you might need on a concrete construction site from start to finish:

 

Pouring Cement

 

Cement Mixer  Moisture Barrier

 

  1. Mixers
    Um, naturally, right? But whether you’re mixing in a truck, a portable mixer or a wheelbarrow, you want to be sure your concrete is thoroughly mixed for maximum strength and durability.
  2. Wheelbarrows
    Ideal for transporting (or even mixing) small batches of concrete or tools on the job site.
  3. Rubber Boots or Work Boots
    Concrete is stiff stuff, and wearing waterproof boots is the best way to get through it and prevent contact with your skin. It’s also easy to rinse your footwear after the concrete is down.
  4. Gloves
    Many concrete mixes contain potentially caustic admixtures that can cause serious burns from extended contact with bare skin. Gloves prevent overexposure to these components (and save a few occasional blisters, too).
  5. Safety Glasses
    Standard on most job sites, wearing safety glasses is an important safety measure when drilling, grinding, power trowelling or sawing concrete.
  6. Compactors
    If the site of the concrete slab is to be prepped with a sub-base of any type, a compactor helps settle the stone or aggregate into position.
  7. Levels
    Both the sub-base and slab surface must be level. A standard long-line level, or a laser level, will let you verify that the slab is completely according to spec before pouring and after.
  8. Tape Measures
    Concrete forms and slab depth need the same “measure twice, pour once” verification as any other material on the job site. They are also useful for testing placement and mapping.
  9. Moisture Retarders
    Moisture or 
    vapor retarders are used to prevent water vapor from intruding on a finished concrete slab. They are generally placed directly under on grade or below grade slabs.
  10. Saws
    Reciprocating saws, circular saws or grinders can be necessary to cut rebar or forms on the job site. They can also be necessary if a problem develops under the slab and a portion of the concrete has to be removed after it has set and dried.
  11. Shovels
    Shovels help distribute concrete around the job site to fill in gaps left during the pouring process or for smaller applications. Square-ended shovels generally work better for concrete; rounded ones spread concrete unevenly.
  12. Rakes and Come-Along Rakes
    Using a rake is the quickest way to begin getting the freshly-poured concrete spread more uniformly into place. Garden rakes work but concrete rakes, also called come-along rakes, have a more scooped blade for more easily pre-leveling new concrete. Concrete rakes also have a tine on the back of the blade to help lift rebar or mesh into position before the concrete begins to harden.
  13. Tampers
    A tamper is used with low slump concrete to push the aggregate below the slab surface. There are types that are used standing on the wet concrete or roller types that can be used from the slab edge.
  14. Vibrators
    Concrete vibrators help release trapped air pockets and excess water from the concrete mix to prevent possibly compromising problems in medium to high slump concrete.
  15. Screeds
    Screeds come in a variety of sizes and can be a specific tool (also called straight edges or bump cutters), or can be simple flat pieces of dimensional lumber. The purpose of a screed is to smooth concrete after it has been moved into place by scraping away any excess from the slab surface.
  16. Bull Floats
    Bull floats are wide-bladed tools on a long (possibly telescoping handle) that provide the first pass for leveling ridges and filling voids in the concrete after the screed work has been done.
  17. Magnesium Floats
    Magnesium floats (or mag floats) are smaller handheld floats typically used to float slab edges or to use for finish work on smaller slabs.
  18. Kneeling Boards
    For hand troweling work especially, kneeling boards provide a smooth way to support your weight on the wet concrete while moving easily along the slab surface.

     

Leveling Concrete

 

Finishing Concrete

  1. Trowels
    Trowels also help smooth concrete surfaces for their finish coats before being left to dry. Hand-troweling is common for smaller slabs, or power trowels are often preferred for large slabs. There are varying types of trowels for specific concrete work.
  2. Float Blades and Troweling Blades
    A variety of blade types is available for floats and power trowels, each designed to accomplish different finishes. Some care must be taken during the 
    troweling stage not to burnish the surface and prolong drying time.
  3. Groove Cutter/Jointer Tool
    For certain job types, grooving the surface also helps prevent cracking or excess damage from shrinkage as the concrete dries or during use.
  4. Edger
    An edger is a tool designed to round exposed concrete edges for a smooth finish.
  5. Brooms
    A traditional finish for a concrete slab is a broom finish – drawing a broom across the surface of the almost-dried concrete slab for a slip-resistant surface.  The finished look can be a smooth draw or a more artistic pattern.
  6. Polishers
    After the slab has dried sufficiently, polishers can be used to produce a surface finish effect, from a gentle smoothing of the surface for traction and safety to a mirror-like shine for an aesthetic finish.
  7. Grinders
    Grinding can also be used for aesthetic effects like a distressed finish or is also sometimes necessary if a slab surface has been over-trowelled and excess moisture is sealed inside the slab.
  8. Dust Collection Systems
    When grinding, polishing, drilling or sawing concrete, a dust collection system helps clear the work area and protect the health of the onsite workers.

     

Testing Concrete

  1. Thermo-Hygrometers Ambient conditions play a big role in determining drying time. A thermo-hygrometer helps monitor both temperature and relative humidity (RH) in the space around the concrete slab and inform potential remediation methods to speed drying time.
  2. Hammer Drills or Rotary Drills
    Placing concrete anchors or doing RH testing require drilling into a cured concrete slab. Hammer drills (or rotary drills) make the process easier by combining rotation with “percussion” – a pounding motion that breaks up the concrete faster for easier installation. And don’t forget the right bits for the job, too.
  3. Concrete Moisture Meters
    Concrete moisture meters can provide handy “spot checks” of drying slabs. However, care must be taken to remember that they, like the hood method or the calcium chloride method, only provide an indication of surface conditions.
  4. Relative Humidity (RH) Test Kit
    For an accurate indication of the internal moisture condition of a drying slab, 
    RH testing with in situ probes provides effective internal moisture measurement. Backed by ASTM F2170, RH testing can provide necessary moisture data for concrete and flooring installers alike and prevent possible moisture-related problems down the road.

 

 

My Twitter profile

Jason Spangler

Jason has 20+ years' experience in sales and sales management in a spectrum of industries and has successfully launched a variety of products to the market, including the original Rapid RH® concrete moisture tests. He currently works with Wagner Meters as our Rapid RH® product sales manager.

 

YOU MIGHT ALSO LIKE

 

Article Image

SCREED, SMOOTH, & LEVEL ALL WITH ONE TOOL

Built for concrete, the new levels offer an industry-first, 3-in-1 solution for a variety of screeding and smoothing applications easy to clean after the messiest concrete jobs

Article Image

SOME PLACES JUST HAVE EVERYTHING YOU NEED

Bendigo Hire - The place where you can buy or hire all the tools of your trade

Article Image

HUSQVARNA K 760 POWER CUTTER REVIEW

Protoolreviews.com road test the powerful Husqvarna K 760 concrete cutter for you

Article Image

HOW TO LAY A SMALL CONCRETE PAD

Another look at how to lay a small concrete slab from DIY Network.com

Article Image

POOLS BY DESIGN

Absolutely Spectacular...what else can you say about this Sunshine Coast Pool Designer

Article Image

BETON TOOL COMPANY

For only the the best concrete tools 

Article Image

CROZIER DIAMOND TOOLS

Selling high quality Diamond Tools and Machinery at competitive prices

Article Image

LOOKING FOR DIAMOND TOOLS

Freet diamond tools are the professionals

Article Image

WHAT ARE THE BEST SKILSAW TOOLS IN 2018

Protool reviews takes a look at the best skilsaw tools from the World of Concrete 2018

 

 

 

 

 

 


Tags: boots brooms concrete concreter construction gloves mixer rakes safety glasses saws screeds shovels trowels vibrators Wagner Meters wheel barrow workwear


This article was written by marketing@concretebroker.com.au all rights reserved. The views and opinions expressed in this article are those of the author(s) and do not necessarily reflect those of concretebroker.com